AirLive A.DUO User Manual
Page 128
5. System Configuration
121
AirLive A.DUO User’s Manual
7. Power on A.DUO, the “Status” LED will light on after 3 seconds.
8. Push the “Reset” button until the “Status” LED off and on again and release the
“Reset” button.
9. If the above process success, the A.DUO LAN LED keep flashing and the tftp serve
shows file download information.
10. It takes around 5 minutes to download firmware and around 5 minutes to update
the firmware.
11. After a successful recovery, the A.DUO boots up automatically.
12. Try access 192.168.1.1, or the IP address you had changed before.
Repeat the processes again if failed.
The name of firmware must change
to zImage and must be in C:\ (The
same folder as running tftpd.exe)