AiM MyChron4 660 - Manual (Page 26)

MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com 25
battery: if battery is removed from the battery pack
for more than 60 seconds (approximately) you will
have to set date and time again.
• Reverse: Use Reverse to switch display dots from
white to black and vice-versa.
• System information: this function shows:
firmware version and gauge serial number.
To run this function, press the MENU/<< button,
highlight the Control Panel Icon (upper Wrench
Icon) by pressing MENU/<< or >>/OFF and press
the MEM/OK button. Select the System Setup
Icon and press MEM/OK. Select the System
Information option, and press MEM/OK to view
Firmware Version. Press ON/VIEW to get back to
the previous menu.
This function sets the driver’s name. This information is
saved inside the test file in order to name every run you
make. Save the settings by selecting the disk icon.
Driver
This function allows you to change the language in your
gauge. There are 2 options: English and Spanish
Language