AiM MyChron4 660 User Manual
Page 25

MyChron4 660
User Manual
Release 1.03
www.aim-sportline.com
24
• TEMP CHT ALARM (Lower Value).-Range :OFF- 400
Select the key , press MEM/OK and use “
>>” and “<<” button
to configure the alarm threshold.
Then press again MEM/OK to stored the changes or
ON/VIEW to discard them.
The system setup menu sets different options of the system:
• Set Time/Date: your MyChron4 660 is equipped
with an internal clock which allows the user to see
the current date and time on the display.
Moreover, this information is saved inside the test
file in order to time and date stamp every run you
make. To run this function, press the MENU/<<
button, highlight the Control Panel Icon (upper
Wrench Icon) by pressing MENU/<< or >>/OFF to
scroll and press the MEM/OK button. Select the
System Setup Icon and press MEM/OK. Select
the Set Time/Date, and press MEM/OK. You can
increase or decrease time values by pressing
MENU/<< or >>/OFF. When done, press
MEM/OK to confirm or ON/VIEW to discard
changes and get back to the previous menu.
The internal clock is powered by one 9V alkaline
System setup