2N VoiceBlue Next v3.1 User Manual
Page 71
71
ALL GSM
RESET CMD
Reset all GSM boards by AT command
SYSTEM RESET
CMD
Reset the system by at&bsys command
L1–ERR
(reserved)
L2–ERR
Error of ISDN layer 2 by Q.921
A: unsol.RX(F)
Received packet RR,RNR,REJ with unexpected bit F=1
B: unsol.DM(F)
Received packet DM with unexpected bit F=1
C: unsol.UA(F)
Received packet UA with unexpected bit F=1
D: unsol.UA(–)
Received packet UA with unexpected bit F=0
E: unsol.DM(–)
Received packet DM with unexpected bit F=0
F: peer re–est
Received packet SABME in status OKEST
G: repeated
SABME
Repeated unsuccessful send of packet SABME
H: repeated DM Repeated unsuccessful send of packet DM
I: failed
(TIMREC)
Unsuccessful breaking–up of status TIMREC
J: N(R) error
Received wrong value N(R) – numbering of packets
K: recv.FRMR
Received packet FRMR (information about error)
L: undef.frame
Received packet of unknown type
M: (I field)
Received wrong I–packet (numbered packet)
N: frame size
Received packet with wrong length
O: N201 error
Value N201 was exceeded (max length of packet)
L3–ERR
tout sts #
(p##)
Error of isdn layer 3: timeout in status # on channel
p##
G2–ERR
ATD/ERROR init
(g##)
Error of isdn layer 2: restart of module g## after
rejected command ATD by GSM network
GSM Cause 150
(g##)
Error of isdn layer 2: restart of module g## after cause
150 was received (call barred by GSM network)
G3–ERR
tout sts #
(g##)
Error of isdn layer 3: timeout in status # on module
g##
C4–ERR
tout sts #
(p##/g##)
Error of connecting layer 4: timeout in status # on call
between channel p## and GSM module g##