2N VoiceBlue Next v3.1 User Manual
Page 36
36
extension. To set the Dynamic CLIP routing function use the GSM incoming
menu
groups
.
If the incoming call is still not processed, the gateway will receive the call and
send either a voice message or the dialtone to the caller. After that, 2N
®
awaits the required count of digits necessary for connection
VoiceBlue Next
set–up. Set the minimum and maximum counts of DTMF digits in the GSM
menu.
incoming groups
If
does not receive the minimum count of digits and no
2N VoiceBlue Next
®
other digit comes within the timeout set in the DTMF dialling timeout
parameter, the call is forwarded to the operator as if the called extension number
were unknown.
If call forwarding to the operator is inactive, the incoming call will be rejected.
DISA Welcome Note
If the DISA service is active and a welcome note has been recorded, the welcome note
is played to every incoming call whose number is not included in the CLIP table or
forwarded according to the Dynamic CLIP routing table. When the welcome note has
been played, the gateway waits for the first DTMF digit for the period set in the GSM
table. Having received the count of digits
incoming groups – DTMF dialling timeout
included in the
table, the
GSM incoming groups Minimum count of DTMF digits
gateway will set up connection to the SIP Proxy. Use the GSM gateway web interface to
upload the DISA welcome note.