Connector lay–out (4–channel version), Status led indicators – 2N VoiceBlue Next v3.1 User Manual

Page 11

Text mode
Original mode

Connector Lay–Out (4–Channel Version)

The following connectors are mounted on the

bottom:

2N VoiceBlue Next

10/100BaseT Ethernet connector with PoE support
RESET button – press for a short time to restart the GSM gateway and for a long
time to restart the GSM gateway and download the factory settings.
Antenna connector for all GSM/UMTS channels
SIM holder

Find a power supply connector (DC Jack 2.1mm) and type plates at the rear.

Status LED Indicators

The

states are indicated by LEDs on the front and system

2N VoiceBlue Next

connector sides. For the LED types see the table below.