2N VoiceBlue Next v3.1 User Manual

Page 51

Caution

Calls via a roaming network may increase you telephone bill!

CLIR – fill in this parameter to define whether or not the called subscriber should
be displayed the calling SIM card telephone number. It is recommended that the
telephone number of the SIM card inserted in the GSM module should not be
displayed to the called subscriber to avoid problems with CallBack from GSM.

Caution

The

and

enable services

Temporary CLIP

Temporary CLIR

must be supported by the GSM/UMTS provider. If not, not, the
provider's network may reject the call!

Maximum count of called minutes – set the maximum count of minutes to be
used via the SIM card per month.
Count of SMS messages – set the maximum count of SMS messages to be sent
via the SIM card per month.
Day to restore call limit and delete statistics – set the day in a month on which
the statistics of the

Maximum count of called minutes

Count of SMS

parameters should be deleted

messages

First count – set the length of the first pulse after which the pulse counting will
be changed as set in the

parameter

Next count

Next count – set the length of one pulse in seconds after the time as defined in
the

parameter elapses

First count

Note

A correct setting of the

and

parameters

First count

Next count

guarantees a correct counting of remaining minutes on SIM
cards. These parameters help limit outgoing calls according to
free minutes. The CDR includes real data.

Day limit of called minutes – set the maximum count of minutes to be called via
the SIM card per day.

Time limits

Define the SIM card use time limits for the GSM group.

use this function to assign up to four independent free minute counters

Call tariffs –
to each GSM module (SIM card) group:

free minutes for calls to own GSM/UMTS network;

Tariff 1 =

free minutes for calls to other GSM/UMTS networks;

Tariff 2 =

free minutes for calls to the PSTN;

Tariff 3 =

free minutes for calls within a closed user group (VPN).

Tariff 4 =
Set the LCR table (assign prefixes to tariffs) correctly to ensure full functionality of this
feature. If routing to a specific tariff is not applied in the LCR table, global free minutes
will be used.

Free minutes Count of free minutes for a specific tariff offered by the provider.
Transferred minutes Maximum count of unused free minutes to be transferred
to the next period.
Day of restoring free minutes Day on which the free minute counters are to
be reset automatically. Choose every 24 hours, a day in a month, or a day in a