2N Omega Lite - Configuration Tool manual v1.7 - Manual (Page 9)

9
1.4. Help

Contents help
 Search…
for words in help

Using help general instructions for using help in OS WIN

About the application information on the SW version of the Program
2. Programming tables for the 2N

OMEGA Lite PBX
The following passages give a detailed description of all of the programming
parameters in the 2N

OMEGA Lite PBX. The chapter is in the same position as
the menu in the PBX configuration device‟s themed index.
For access to programme the PBX you need a password.
The PBX configuration instrument enables two types of users to change the PBX
settings.
Password for a Supervisor user
The user with the supervisor authorisation has access to all of the PBX
parameters and can also change the password for a user with user authorisation.
Password for an ordinary User
The user authorisation only allows certain PBX parameters to be changed when
programming and the User password to be changed.
All parameters are available for reading.
The user can change the following parameters
- Authorisation numbers
- Emergency numbers
- Bank holidays
- The name of the VL
- Internal priority lines
- Authorisation without ARS
- Allowing services
– all
- Divisions
- Classification into groups and divisions
- Calling to the entire division
- FLASH and the type of choices for VL
- Allowing direct choice for bundles
- Operating parameters for internal and external lines
- Buttons for system telephones
- External lines
– name and type of choice
- Bundles for ring retrieval
- Assigning ringing tables into the ringing table for external lines
- Labelling lines
- Switchover times
- Global group data
– dialling tone, softening tone, DISA tone
- Quick dialling
– joint and personal