2N Omega Lite - Configuration Tool manual v1.7 User Manual
Page 83
83
2.9. Numbering
2.9.1. Internal lines
See Internal lines /Numbering
2.9.2. Services
Table for programming the numbering plan of the PBX‟s services.
2.9.3. DID for the ringing table
Enables an external subscriber to call through to the ringing table during a DID.
If the DID number is not in agreement with the subscribers‟ DID or internal
numbering and agrees with the number in the DID table for the ringing table then
the ringing table is used, here set up with regards to the DAY and NIGHT regime.
Enables the ringing table to be set up during DID (ISDN
– Point to Point type,
DISA).
2.10. Operating parameters
2.10.1. Internal lines
2.10.1.1. Redirecting
This table clearly displays all of the redirecting for all of the internal subscribers.
2.10.1.2. Tariff credit
The item Prepaid serves for assigning the maximum number of 16 kHz
impulses received. When the assigned number is reached the call automatically
ends. A new call can be made as soon as a new credit programme is topped up.
2.10.1.3. Blocking
Here it is possible to easily check or set blocking for each internal line including
its password and not stop the service.
2.10.1.4. Alarms
Set up an “alarm” on each line. It is possible to choose between “Single” or
“Repeating”.
2.10.1.5. Account statistics
Clearly displays the costs of the internal lines from outgoing calls through the
external lines that have tariffs. An update is available during each data reading
from the PBX.