2N Omega Lite - Configuration Tool manual v1.7 - Manual (Page 75)

75
2.7.2. Switches, Broadcast, Tape Recorder
Enter the port relay for Activate temporary/permanent switch for groups PBX 1
and 2.

Temporary
– activate the switch temporarily = default #85 (the relay is closed
until the dialling timeout expires = 15s, the activation is terminated immediately
by hang-up). If this item is empty, you can enter the required port relay after
dialling the service.

Permanent – activate the relay permanently = default #83 (the relay is closed
permanently and can be opened using the Deactivate permanent switch service
= default #84). If this item is empty, you can enter the required port relay after
dialling the service.
Assign AUX group to Broadcast and Tape recorder

Broadcast - the selected AUX ports of the selected AUX group will be used
for the Broadcast=default #20 service at relax and for the Announce through
Broadcast service in the ringing table.

Tape recorder - the selected AUX ports of the selected AUX group will be used
for the Switch on tape recorder=default #20 service during a call and also
automatically with every call of the extension for which the Switch on tape
recorder service is selected in the Subscriber lines/Service enable /Activation
menu.
Assign the AUX ports into groups in the Global data/AUDIO groups menu.