2N Omega Lite - Configuration Tool manual v1.7 - Manual (Page 57)

57
GSM line

Name - a maximum 14-character name for the external line

Series
– only an incoming external line which is not tested for correct working
and cannot be entered upon in the outgoing direction

Private
– a line connected to a private network, which is not charged

Without authorisation
– checks on authorisation not made on this line

Roaming enabled – allowing roaming on the GSM port

Receive SMS
– allowing SMS to be accepted

Send SMS – allowing SMS to be sent

SMS after unanswered call
– the SMS is sent if the called party does not
receive the call (the missed call)

SMS after accepted call – the SMS is sent if the called party answers the call
(the established call)

Trace GSM
– enable logging of AT communication via a GSM module into
LogSystem listings. By doing so you make the log heavily loaded, so think twice
before enabling.

SMS at No Answer – The text is used in the SMS if the called party does not
answer the call (the missed call) (text is common with text for MobilityExtension
feature

SMS after accepted call – The text is used in the SMS if the called party
answers the call (the established call) (text is common with text for
MobilityExtension feature)
%n = Calling party number
%c = Calling party name