Internet connection ipod / iphone / ipad, Internet connection - ipod / iphone / ipad, Internet connection – IOGear GWPAP1 User Manual

Page 8

Text mode
Original mode

Internet Connection

iPod / iPhone / iPad

Router Mode Setting
Follow the steps below to setup the NetShair Nano for Router
Mode. If you are unsure about which mode to use, see Router
Mode or AP Mode (page 5) to confirm the proper setting.

1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is

connected. Open the NetShair Nano App.

2. On the Home screen, tap

Advance Setting.

3. Tap the

Set Operation Mode button

4. Select

Router for the Operation Mode.

5. A notification saying your settings
have been saved will appear,
tap

Later to continue without the

NetShair Nano rebooting.

DHCP Setup continue to page 9
DSL Modem Setup continue to page 10