Internet connection android, Internet connection - android, Internet connection – IOGear GWPAP1 User Manual

Page 14

Text mode
Original mode

Internet Connection

Android

Router Mode Setting
Follow the steps below to setup the NetShair Nano for Router
Mode. If you are unsure about which mode to use, see Router
Mode or AP Mode (page 5) to confirm the proper setting.

1. Make sure the “NetShair_Nano_XXXX” Wi-Fi network is
connected. Open the NetShair Nano App.

2. On the Home screen, tap

Advance Setting.

3. Tap

Set Operation Mode and then

tap

Router and press OK.

4. A notification saying your settings
have been saved will appear, tap

Later to continue without the

NetShair Nano rebooting.

DHCP Setup continue to page 15
DSL Modem Setup continue to page 16