IOGear GWPAP1 - Manual (Page 4)

4
1 x Quick Start Guide
1 x Warranty Card
RS
2 3
5
6
4
1
7
8
Package Contents
System Requirements
Overview
1 x NetShair Nano Wi-Fi Router/
Access Point
• USB port or USB charger
• Wired Ethernet connection with standard RJ45 connector
• Wi-Fi enabled computer or mobile device with either Android
2.3.3+ or iOS 5.1+
• NetShair Nano App downloaded from Google Play Store™
or Apple App Store
SM (App not required for PC/MAC)
1. WPS green LED status indicator
Flashing = WPS mode active
Off = WPS mode off
2. WLAN blue LED status indicator
Flashing = Network active
Off = No active network
3. Network green LED
LED On = Port is linked
Flashing = Transmitting /
Receiving data
Off = No active link
4. RJ-45 Ethernet port
5. WPS (Wi-Fi Protected Setup) button
6. USB power connection 7. Reset button
8. USB pass-through
charging port