Netshair nano setup laptop / computer, Netshair nano setup - computer / other, Netshair nano setup – IOGear GWPAP1 User Manual

Page 19

Text mode
Original mode

NetShair Nano Setup

Computer / Other

Note: Follow the steps below to setup NetShair Nano using
the web client for computers or mobile devices with a full
HTML browser.

Do not connect Ethernet cable until last step! (See Internet
Connection)
1. Power on the NetShair Nano by plugging it into a powered
USB port on your laptop / desktop or by plugging it into a
USB charging adapter of a USB mobile device.

2. Click on the wireless icon on the bottom right corner of
the screen.

3. Choose the
“NetShair_Nano_XXXX”
Network.

4. Enter the default password
“12345678” and then press

OK to connect.

5. Wireless Network connection
will show NetShair_Nano_
XXXX connected.