Internet connection laptop / computer, Internet connection - computer / other, Internet connection – IOGear GWPAP1 User Manual

Page 20

Text mode
Original mode

Internet Connection

Computer / Other

1. Make sure the
“NetShair_Nano_XXXX”
Wi-Fi network is connected.
Open the Browser and enter
192.168.1.254 into the address
bar to access the web client.

2. On the Operation Mode page,
click the drop down menu and
select

Router, then click

Apply Change. A notification

saying your settings have been
saved will appear, click

Reboot Later to continue

without the NetShair Nano
rebooting.

Router Mode Setting
Follow the steps below to setup the NetShair Nano for Router
Mode. If you are unsure about which mode to use, see Router
Mode or AP Mode (page 5) to confirm the proper setting.

DHCP Setup continue to page 21
DSL Modem Setup continue to page 22