Black Box LR1530A-EU-R3 - Manual (Page 83)

Servicing Information
77
Connecting to the Console Connector
The console connector on the router is a DCE interface on a
RJ45 pinout. The supplied DB9 to RJ45 converter should be
used to connect to the DB9 connector of a DTE terminal.
This connection will then provide access to the built-in menu
system.
If the console interface is to be connected to a modem or
other DCE device, a standard RS-232 crossover converter
should be used.
The following table illustrates the console pinouts.
RJ45 connector
on unit (DCE)
DB9 connector
on converter (DCE)
RS-232
signal name
2 6 CTS
3 4 DTR
4 5 GND
5 2 RxD
6 3 TxD
7 8 DSR
8 1 CD
Figure C-3 Rear View of the Console and LAN Connectors