Black Box LR1530A-EU-R3 - Manual (Page 79)

73
A
PPENDIX
C
S
ERVICING
I
NFORMATION
Opening of the case is only to be performed
by qualified service personnel.
WARNING !
Before servicing ensure that appliance coupler is
disconnected.
Always disconnect the power cord from the rear panel of
the bridge/router.
Geraetesteckvorrichtung trennen vor den Wartung.
Opening the case
1) Remove power from the bridge/router and remove the other
cabling.
2) Turn the bridge/router over and place it on a flat, cushioned
surface.
3) Remove the two Phillips head screws that fasten the case
together.
4) Hold the two halves of the case together and turn the
bridge/router right side up.
5) Lift off the top half of the case.