Black Box LR1530A-EU-R3 - Manual (Page 27)

Applications
21
Configuration: The default configuration for routers shipped outside
North American is to have frame relay disabled. To run frame relay on
these routers, it must first be enabled
7
Frame Relay enable
Location: Main
Ä Configuration
Ä WAN Set up
Ä Link Set up
Ä Frame Relay
enabled
The router will request confirmation of the change, enter
“yes”.
For an router with a CSU-DSU interface, the default clock speed that
the router will expect to receive from the DCE link is 64Kbps. If the
DCE link is 56 Kbps, then the Link Speed value must be reset to 56
here.
7
Link Speed
Location: Main
Ä Configuration
Ä WAN Set up
Ä Link Set up
Ä Link Speed
56