Black Box LR1530A-EU-R3 - Manual (Page 11)

5
1 - I
NSTALLATION
The router is an Ethernet Bridge/Router that provides bridging,
IP/IPX routing, and compression over a frame relay permanent virtual
circuit or a PPP leased line circuit..
The following instructions provide a quick set-up guide for installation
of the router
Unpack the unit
Rough handling during shipment can damage electronic equipment. As
you unpack the router, carefully check for signs of damage. If damage
is suspected, contact the shipper. Save the box and all packing material
to protect the router should it ever need to be moved or returned for
service.
Check the packing slip that identifies the components and the LAN
connector. The connectors on the rear of the router provide all
external connections to the router.
Select a Site
Place the router in a well-ventilated area. The site should maintain
normal office temperature and humidity levels. Air vents located on
the rear of the router must have an inch or so of clearance from any
object. Units should not be stacked.