Black Box LR1530A-EU-R3 - Manual (Page 49)

Applications
43
7
IPX Frame Types
Location: Main
Ä Configuration
Ä IPX Routing Set up
Ä Configure LAN Nets
Ä Ethernet-II Frames
Ä RAW 802.3 Frames
Ä IEEE 802.2 Frames
Ä 802.2 SNAP Frames
Define the appropriate IPX network number for
the appropriate frame type. Note that IPX network
numbers must be unique. If more than one frame
type is to be used, each frame type must have a
unique IPX network number. There must be no
duplicate IPX network numbers within your entire
IPX routed network, they must all be unique. The
IPX network numbers may be any value from 0 to
FFFFFFFF HEX.
Configuration: Since there is not a server on LAN 2 in this
example, the IPX network number may be manually
configured and the router will proceed to route between the
two networks. When manually configuring an IPX network
number for a frame type that has already learned a network
number, IPX routing must be disabled before the new
network number is assigned.