Brother Fax Machine/Multi-Function Center MFC-9125CN - Manual (Page 44)

Chapter 3
28
LCD Contrast
3
You can change the contrast to make the
LCD look lighter or darker.
a
Press Menu, 1, 6.
General Setup
6.LCD Contrast
b
Press a to make the LCD darker. Or,
press b to make the LCD lighter.
Press OK.
c
Press Stop/Exit.
Dial Prefix
3
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number
3
a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l
and !. (Press Hook to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press Hook to
enter the break.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
c
Press Stop/Exit.
Changing the prefix number
3
a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Do one of the following:
 To change the prefix number,
press 1.
 To exit without making a change,
press 2. Go to step d.
c
Enter a new prefix number using the dial
pad (up to 5 digits), press OK.
d
Press Stop/Exit.