Brother Fax Machine/Multi-Function Center MFC-9125CN - Manual (Page 110)

94
13
Your Brother machine supports the
PictBridge standard, allowing you to connect
to and print photos directly from any
PictBridge compatible digital camera.
Even if your camera is not in PictBridge mode
or does not support PictBridge, you can
connect your camera as a normal storage
device. This enables you to print photos from
your camera. Follow the steps for “Printing
data from a USB Flash memory drive
(MFC-9325CW only) on page 99”.
Before using
PictBridge
13
PictBridge requirements
13
To avoid errors, remember the following
points:
 The machine and the digital camera must
be connected using a suitable USB cable.
 The image file must be taken with the
digital camera you want to connect to the
machine.
Using PictBridge
13
Setting your digital camera
13
Make sure your camera is in PictBridge
mode. The following PictBridge settings may
be available from the LCD of your PictBridge
compatible camera. Depending on your
camera some of these settings may not be
available.
 Copies
 Qualities
 Paper size
 Date print
 File name print
 Layout (1 in 1 printing/Index printing only)
Note
The names and availability of each setting
depends on the specification of your
camera.
You can also set the following PictBridge
settings by using the control panel.
1 If you choose the paper size Letter, A4 or B5, Portrait
will be chosen. If you choose A5, B6 or A6,
Landscape will be chosen.
Printing photos from a digital
camera (MFC-9325CW only)
13
Menu selections Options
Paper Size Letter, A4, B5, A5, B6, A6
Orientation Portrait, Landscape 1
Date & Time Off, On
File Name Off, On
Print Quality Normal, Fine