IOGear GCS1004 - Manual (Page 15)

15
Key Function
[X] [Enter] Toggles between the default ([Scroll Lock] [Scroll
Lock]) and alternate ([Ctrl] [Ctrl]) Port Switching
keys.
[K] [Enter] Toggles the KVM focus.
[S] [Enter] Toggles the audio focus.
[A] [Enter] [n] Starts Auto Scan. The KVM focus cycles from
port to port at n second intervals.
Note: Replace n with a number between 1 and 4:
• [1] changes scan interval to 3 seconds
• [2] changes scan interval to 5 seconds (default)
• [3] changes scan interval to 10 seconds
• [4] changes scan interval to 20 seconds
To exit Auto Scan, press [Esc] or [Spacebar].
[D] [Enter] Invokes Video DynaSyncTM, IOGEAR’s exclusive
technology that eliminates boot-up display
problems and optimizes resolution when
switching between ports.
[M] [Enter] Enables / disables mouse emulation.
[W] [Enter] Enables / disables mouse port switching.
[double-click scroll wheel] If mouse port switching is active, double-clicking
the scroll wheel of your USB mouse will switch it
to the next port.
[E] Enables/disables Power On Detection.
[F2] [Enter] Enables Mac keyboard emulation.
[F3] [Enter] Enables Sun keyboard emulation.
[F10] [Enter] Automatically detects and sets the keyboard
operating platform.
[F4] [Enter] Lists the current switch settings via the paste
function of a text editor.
[F5] [Enter] Performs a reset on all USB devices.
[F6] [nn] [Enter] Sets the keyboard language.
Note: nn is a two-digit number that represents
one of the following keyboard language code:
US English: 33; French: 08; Japanese: 15.
[R] [Enter] Resets the hotkey settings to their default status.
Hotkey Default Settings
After invoking HSM (see page 11), key in one of the following keys to perform the
corresponding function: