IOGear GCS1004 User Manual

Page 13

Video DynaSyncTM
Video DynaSync

is IOGEAR’s exclusive technology that eliminates boot-up display problems

and optimizes resolution when switching between ports.

To manually detect and remember monitor EDIDs, do the following:

1. Invoke HSM (see page 11).
2. Press [D] [Enter].

Note: If the monitor is disconnected and reconnected, the GCS1002 / GCS1004 will re-exe-
cute Video DynaSyncTM.

Mouse Emulation Control
The default setting is enabled. To disable, do the following:

1. Invoke HSM (see page 11).
2. Press [M] [Enter].

This procedure is a toggle. Repeat to enable.

Mouse Port Switching
The Mouse Port Switching function can be enabled or disabled. The default setting is disabled.
To enable, do the follow:

1. Invoke HSM (see page 11).
2. Press [W] [Enter].

This procedure is a toggle. Repeat to disable.

Note: The feature is only supported when mouse emulation is enabled. See Mouse Emulation
Control above.

Power on Detection
With the Power On Detection feature, the switch automatically switches to the next powered-
on computer if one computer is powered off. This feature is enabled by default, to disable:

1. Invoke HSM (see page 11).
2. Press [E].

This procedure is a toggle. Repeat to enable.