IOGear GCN1000 - Manual (Page 37)

37
Set Video Parameters: Brings up the Video settings dialog box
Keypad: Brings up the Keypad options
Mouse Synchronization: Initiates the mouse synchronization process
Lock Key LEDs: The “LEDs” show ( from left to right), the Num Lock,
Caps Lock, and Scroll Lock status of the local computer
When the Icon is “Lit”, the lock is active Clicking on the icon toggles the mode.
Note: When fi rst connected, toggle the LEDs to set the correct state
The Video resolution and refresh rate of the remote computer are displayed
below the lock icons.
Message Board: Brings up the Message board
Sends a Ctrl+Alt+Del signal to the local system
Exits the program.
Note: Does not close the session.
The Tool Bar Icons and their functions are explained in the table below
Set Video Parameters:
Clicking on this button brings up the Video settings dialog box