beautypg.com

Motor and brake disassembly, Motor and brake disassembly -34 – JLG M600 Service Manual User Manual

Page 72

background image

SECTION 3 - CHASSIS & TURNTABLE

3-34

– JLG Lift –

3121813

Motor and Brake Disassembly

1. With unit resting on bench with Motor (10) end up,

loosen Hex Bolts (12) and remove Brake/Motor Sub-
assembly from the Housing (1G) (See assembly
drawing).

2. Remove O-Ring (5A) from between Brake/Motor

Subassembly and Housing (1G) (See assembly
drawing).

3. Remove Thrust Washer (11) from between Brake/

Motor Subassembly and Carrier.

4. Remove one O-Ring Plug (13) from Motor (10) and

one O-Ring Plug (13) from Brake Housing (6).

5. Remove O-Ring Plug (4) from Brake Housing (6).

5A. O-ring
11. Thrust Washer
12. Hex Bolts

Figure 3-19. Motor and Brake Disassembly

This manual is related to the following products:
See also other documents in the category JLG Special machinery: