JLG M600 Service Manual - Manual (Page 194)

SECTION 6 - JLG CONTROL SYSTEM
6-28 – JLG Lift – 3121813
Table 6-9. Calibration Ranges/Defaults
Calibration Range Defaults
E600 M600
BRAKE 0 to 100 25
PUMP@0% 0 to 50 6
PUMP@100% 50 to 100 100
FLOW VALVE@0% 0 to 50 44
FLOW VALVE@100% 50 to 100 60
LIFT VALVE@0% 0 to 100 40
LIFT VALVE@100% 0 to 100 70
SWING VALVE@0% 0 to 100 45
SWING VALVE@100% 0 to 100 52
TEMPERATURE 0 to 100 50
TRACTION I 0.50 to 2.00 1.00
PUMP I 0.50 to 2.00 1.00
SPEEDprop1 0 to 30 8
SPEEDprop2 0 to 30 16
SPEEDint 0.0 to 2.5 0.3
PLUGmax 30 to 100 75
TILTdelayIN* 0.0 to 5.0 1.0
TILTdelayOUT* 0.0 to 5.0 0.1
*NOTE: TiltdelayIN and TILTdelayOUT are adjusted in internal units, not in 0.1s increments.