Battery installation - (4-6v batteries) (option), Front rear – JLG 10MSP Service Manual User Manual

Page 59

SECTION 3 - BASE COMPONENTS

3121228

– JLG Lift –

3-27

Battery Installation - (4-6V Batteries) (OPTION)

Battery Installation - 4-6V

(Left Side Batteries Shown with Machine Covers Removed)

1. Batteries (Left Side)
2. Battery Hold-Down Bra-

kets and Fasteners

3. Drive Motor Cover Screw

Bracket

4. Move Rear Battery For-

ward and Lift Out

NOTE: The carry deck, support frame will need to be removed to

remove the batteries. Once hold-down brackets (item 2)
are removed, remove the cables from the batteries. Slide
the rear battery forward to clear the bracket (item 3).
Then lift battery out of base frame.

1. Ground Control Module
2. Right Front Battery
3. Left Front Battery
4. 175 Amp Inline Fuse

5. Right Rear Battery
6. Left Rear Battery
7. Battery Quick-Disconnect

NOTE: Label battery cables before removing to ensure

proper installation.
All other connections to Ground Control Module
same as in Section 4 - Figure 4-2.

Figure 3-6. Battery Cable to Battery Termi-

nal Connections (4-6V)

FRONT

REAR