JLG TF6-42 (9150-4003) Operator Manual - Manual (Page 67)

Form No. 20140, Issued 3/03 z z z z z Transformer Series Work Platform Manual
General
This manual provides important information regarding safe operating procedures
for JLG/Gradall Transformer Series work platform. If you have any questions
regarding the JLG/Gradall personnel platform contact your JLG/Gradall Material
Handler Distributor.
Operator/Platform Occupant Qualifications
Material Handler operators and platform occupants must be in good physical
and mental condition, have normal reflexes and reaction time, good vision and
depth perception and normal hearing. They must not be using medication which
could impair abilities nor be under the influence of alcohol or any other intoxicant
during the work shift.
The operator must be familiar with Sections 6, 7, 8, 9, 10 of ANSI A92.5-1992.
These sections contain the responsibilities of the operator concerning safety,
training, inspection, maintenance, application and operation.
In addition, the operator must read/view, understand and comply with
instructions contained in the following material furnished with the material
handler:
• This JLG/Gradall Transformer Series Work Platform Manual
• The /Gradall TF6-42 Material Handler Owner/Operator Manual
• ANSI A92.5 Responsibilities Manual
• EMI Aerial Work Platform Safety Manual
• GRADALL Material Handler Safety Manual
• All instructional decals and plates
• Any optional equipment instructions furnished
The operator and platform occupant(s) must also read, understand and comply
with all applicable Employer, Industry and Government rules, standards and
regulations.
Related Manuals & Decals
Separate publications are furnished with the material handler to provide
information concerning safety, replacement parts, operation & maintenance
procedures and vendor components. Replacement manuals, decals and
instruction placards can be ordered from your JLG/GRADALL Material Handler
Distributor.
Capacity Limitations
Refer to the capacity decal on Platform and capacity indicators located on the
control console. The load capacity includes personnel, materials, tools, etc.
The maximum capacity of your work platform is based on specific model material
handler/work platform combination.
Serial Number Location
Specify Model and Serial Number when ordering parts and when discussing
specific applications and procedures with your Distributor. The Serial Number
plate is located on the left side of the adapter support.
NOTE!
The terms “Gradall personnel work
platform,” “Transformer Series work
platform,” “work platform,” and
“platform” are used interchangeably
throughout this Manual.
“Material handler” and “handler” are
used interchangeably throughout
this manual.
INTRODUCTION
Though no offense or
discrimination is intended, only
the masculine pronouns will be
used throughout the remainder of
this Manual.
NOTE!