Decals – JLG TF6-42 (9150-4003) Operator Manual User Manual
Page 17
Form No. 20136 3/03 • TF6-42 Owner/Operator Manual
2.5
Located on left cab outside wall
P/N 9150-3109
Located on left outside cab wall
P/N 7733-3027
9150-3109 REV -
NO RIDERS. Riders could FALL OFF
machine causing death or serious injury.
R
7733-3027
9150-3096 REV A
When lifting personnel, USE ONLY a Gradall manufactured personnel
work platform.
READ AND UNDERSTAND personnel work platform Owner/Operator manual
before lifting personnel.
DO NOT DRIVE machine from cab when personnel are on platform.
All personnel on platform must WEAR A FULL BODY HARNESS, with
lanyard attached to a designated anchorage point.
OPERATE CONTROLS CAUTIOUSLY and lightly when lifting or
positioning personnel.
IN ADDITION, when using a personnel work platform
WITHOUT CONTROLS:
Do not use personnel work platform without proper
CAPACITY CHART DISPLAYED in cab.
When personnel are on platform, the OPERATOR MUST REMAIN SEATED
in cab with personnel in direct line of sight.
Failure to comply could result in death or serious injury.
Located on left side of boom
P/N 9100-3031
Located on boom
P/N 9151-3210
406 MILL AVE. S.W. NEW PHILADELPHIA, OHIO
MADE IN U. S. A.
THE CAPACITY OF FORKLIFT, ATTACHMENT AND FORK
COMBINATION MAY BE LESS THAN THE CAPACITY SHOWN
ON ATTACHMENT - CONSULT FORKLIFT NAMEPLATE
AND ALSO INSURE FORKS ARE OF PROPER SIZE.
9015-3001
ATTACHMENT
SERIAL NUMBER
WEIGHT
CAPACITY
HYD. PRESSURE
Located on attachment
P/N 9015-3001
Located on boom head,
and inside right cab wall
P/N 9150-3096
MOVING PARTS could cut or crush causing
death or serious injury. Keep clear of
moving parts while engine is running.
9151-3210 REV -
DECALS