JLG 10MSP Operator Manual - Manual (Page 89)

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121227 – JLG Lift – 5-15
Selecting Programmable Item to Adjust Adjusting Programmable Setting
TO EXIT Programming Mode after adjusting programmable set-
tings, power machine down with either the Main Power Selector
Switch or Emergency Stop Button.
Selecting Programmable Item to Adjust
1. Use the Platform UP/DOWN buttons (1) to scroll through the
list of programmable items available to your programming
level.
2. Once a programmable item to be adjusted is selected, press
the Brake Release button (2) to enter that settings’ adjustment
mode.
Adjusting Programmable Setting
1. Adjust the programmable setting using the Platform UP/DOWN
buttons (1), see Table 5-4 for range of settings for that item.
2. Once parameter is set for the programmable item, press the
Brake Release button (2), this will enter the parameter and
return you to the Programmable Settings Menu.