JLG 10MSP Operator Manual - Manual (Page 40)

SECTION 3 - MACHINE OPERATION
3-12 – JLG Lift – 3121227
Brake Release Button
The machine must be POWERED ON and the Ground Control Sta-
tion set to the GROUND CONTROL MODE to manually release the
brakes. The brakes only DISENGAGE (electrically) when the joy-
stick control is moved off center during driving or are manually
DISENGAGED (electrically) using the Brake Release Button on the
front of the Ground Control Station.
NOTE: If the machine’s batteries are completely depleted of
electrical charge the brakes cannot be released manually.
DO NOT MANUALLY DISENGAGE THE BRAKES UNLESS MACHINE IS
SETTING ON A LEVEL SURFACE OR MACHINE IS FULLY RESTRAINED.
Platform Up and Down Buttons
PUSH and RELEASE -
TO DISENGAGE Brakes
PUSH and RELEASE AGAIN -
TO ENGAGE Brakes
PUSH IN -
TO ELEVATE Platform
RELEASE -
TO STOP ELEVATING
PUSH IN -
TO LOWER Platform
RELEASE -
TO STOP LOWERING