JLG 10MSP Operator Manual - Manual (Page 49)

SECTION 3 - MACHINE OPERATION
3121227 – JLG Lift – 3-21
Drive/Lift Mode Selector Switch Joystick Function Enable Lever
Drive/Lift Mode
Selector Switch
1. LIFT Mode
2. DRIVE Mode
PUSH the rocker
switch to select mode
of operation.
Whichever mode is
selected the appropri-
ate LED indicator on
the display panel
below will light up
showing which mode
has been activated for
joystick operation.
IMPORTANT:
The selected mode
will only remain
active for 5 sec-
onds if the function
is not operated.
1 2
Joystick Function
Enable Lever
The joystick enable lever
on the front of the joy-
stick control, must be
engaged and held in dur-
ing any joystick opera-
tion.
Note:
The platform function
enable foot switch must
also be pressed and
held simultaneously
with the joystick enable
lever.