Maintenance and inspection table codes, Footnotes – JLG SSV10 Service Manual User Manual
Page 24
SECTION 2 - GENERAL SERVICE INFORMATION
2-4
– JLG Lift –
3121187
Maintenance and Inspection Table Codes:
1. Check for proper and secure installation.
2. Visual inspection for damage, cracks, distortion, or
excessive wear.
3. Check for proper adjustment.
4. Check for cracked or broken welds.
5. Operates properly.
6. Returns to neutral or "off" position when released.
7. Clean and free of debris.
8. Interlocks function properly.
9. Check for signs of leakage.
10. Decals installed and legible.
11. Check for proper fluid level.
12. Check for chafing and proper routing.
13. Check for proper tolerances.
14. Properly lubricated.
15. Torqued to proper specification.
16. No gouges, excessive wear, or cords showing.
17. Properly inflated and seated around rim.
18. Proper and authorized components.
19. Fully charged.
20. No loose connections, corrosion, or abrasions.
21. Verify.
22. Perform.
23. Sealed properly.
24. Overrides Platform controls.
25. Inspected per Service and Maintenance Manual.
Footnotes:
(a) Prior to use each day; or at each Operator change
(b) Prior to each sale, lease, or delivery
(c) In service for 3 months; or Out of service for 3 months
or more; or Purchased used
(d) Annually, no later than 13 months from the date of the
prior inspection
GENERAL
Operation & Safety Manual in Storage Box
21
21
21
ANSI & EMI Handbooks in Storage Box
21
21
21
Capacity Decals Installed, Secure, Legible
21
21
21
All Decals/Placards Installed, Secure, Legible
21
21
21
"Walk-Around" Inspection Performed
22
Annual Machine Inspection Due
21
No Unauthorized Modifications or Additions
21
21
All Relevant Safety Publications Incorporated
21
21, 22
General Structural Condition and Welds
2, 4
2, 4
All Fasteners, Pins, Shields, and Covers
1, 2
Grease and Lubricate to Specifications
22
22
Function Test of All Systems
22
22
Paint and Appearance
7
7
Stamp Inspection Date on Frame
22
Notify JLG of Machine Ownership
22
*
Change only when serviced, requires 6 oz. (175cc’s) to fill.
**
Replace every 200 - 400 hours (Traction Time) - Depending on Application.
*** Drain and refill with fresh hydraulic fluid every two years.
Table 2-2. SSV-10 - Preventive Maintenance & Inspection Schedule. (Continued)
AREA ON MACHINE
INTERVAL
PRE-START (a)
INSPECTION
3 MONTH
PREVENTATIVE
MAINTENANCE
6 MONTH
PREVENTATIVE
MAINTENANCE
PRE-DELIVERY (b)
OR FREQUENT (c)
INSPECTION
ANNUAL (d)
(YEARLY)
INSPECTION