JLG SSV10 Operator Manual User Manual

Page 69

SECTION 3 - MACHINE OPERATION

3121186

– JLG Lift –

3-41

THE COMBINED WEIGHT OF PERSONNEL, MATERIALS, EQUIPMENT
PLUS ANY LOAD ON THE HANGER ARM ACCESSORY MUST NOT
EXCEED THE MAXIMUM LOAD CAPACITY OF THE PLATFORM.

Loading and Transporting an Item using the
Hanger Accessory

Use the following steps as a guide when loading and transporting
an object with the hanger accessory arm.

1. Keep the hanger arm in the stowed position when not in use.

2. When ready to use, pull the lock pin from the stowed position

hole and swing the hanger arm into the carry position. Place
pin in the carry position hole locking the hanger arm in place.

3. Load the object onto the hanger arm and use the hanger arm

strap to secure the object during transport.

4. Be aware of clearance above, below, and around the object

when driving and lifting or lowering the platform.

1. Mounting Bracket/Capacity

Decal (a)

2. Lock Pin (Stowed Position)
3. Lock Pin (Carry Position)

4. Hanger Arm (Stowed Position)
5. Hanger Arm (Carry Position)
6. Hanger Arm Strap

NOTE: (a) Maximum load capacity of hanger is 50 lb. (23kg).