JLG SSV10 Operator Manual - Manual (Page 55)

SECTION 3 - MACHINE OPERATION
3121186 – JLG Lift – 3-27
THE GROUND CONTROL STATION CONTAINS A 1.5 DEGREE TILT
ALARM, IF THE TILT ALARM HAS BEEN ACTIVATED, THE PLATFORM
WILL NOT ELEVATE. ALSO IF THE TILT ALARM HAS BEEN ACTIVATED
WHEN THE PLATFORM IS ELEVATED, THE DRIVE AND LIFT UP FUNC-
TIONS WILL BE DISABLED UNTIL THE PLATFORM IS COMPLETELY
LOWERED, THEN DRIVEN OFF THE TILT CONDITION.
Lift Mode
1. Activate the Lift Mode
using the Drive/Lift
Mode Selector switch.
2. Platform LIFT DOWN
Direction
3. Platform LIFT UP
Direction
Withing 5 seconds of
activation - ENGAGE
and HOLD both the
JOYSTICK ENABLE
LEVER and the FOOT-
SWITCH ENABLE - then
move the joystick in the
direction of LIFT (3) OR
LOWER (2).
2
3
SECTION 3 - MACHINE OPERATION
3121186 – JLG Lift – 3-27
THE GROUND CONTROL STATION CONTAINS A 1.5 DEGREE TILT
ALARM, IF THE TILT ALARM HAS BEEN ACTIVATED, THE PLATFORM
WILL NOT ELEVATE. ALSO IF THE TILT ALARM HAS BEEN ACTIVATED
WHEN THE PLATFORM IS ELEVATED, THE DRIVE AND LIFT UP FUNC-
TIONS WILL BE DISABLED UNTIL THE PLATFORM IS COMPLETELY
LOWERED, THEN DRIVEN OFF THE TILT CONDITION.
Lift Mode
1. Activate the Lift Mode
using the Drive/Lift
Mode Selector switch.
2. Platform LIFT DOWN
Direction
3. Platform LIFT UP
Direction
Withing 5 seconds of
activation - ENGAGE
and HOLD both the
JOYSTICK ENABLE
LEVER and the FOOT-
SWITCH ENABLE - then
move the joystick in the
direction of LIFT (3) OR
LOWER (2).
2
3