JLG SSV10 Operator Manual User Manual

Page 61

SECTION 3 - MACHINE OPERATION

3121186

– JLG Lift –

3-33

Programming Items

Allows programming of the items shown in Table 3-5 on page 3-
34, the following is a brief explanation of each programming item.

NOTE:

There are two production modules available at this time,
one for North/South American and European languages,
and one for Asian languages. All programmable items
between these modules are identical with the exception
of language selection.

• Back To Main (Menu) - When selected, will return to main

level menu.

• Set Language - Selects the language that text on the LCD

screen will be displayed.

• Set Sleep Time - Allows setting the length of time the

machine will remain powered up without control input before
powering itself down.

• Set Polarity of Keypad Code - Turns ON or OFF the Pro-

grammable Security Lock switch circuit, if equipped.

• Enable Detection of Horn Open Circuit - Enables horn

electrical circuit to be turned ON (YES) or OFF (NO) if
machine is equipped with a horn.

• Enable Detection of Beacon Open Circuit - Enables mast/

base beacon strobe electrical circuits to be turned ON (YES)
or OFF (NO) if machine is equipped with either or both bea-
con strobes.

• Forward Alarm Disable - When turned ON (YES) will disable

the alarm when driving forward.