JLG SSV10 Operator Manual - Manual (Page 64)

SECTION 3 - MACHINE OPERATION
3-36 – JLG Lift – 3121186
Entering Password Programming Mode Selection
Entering Password
1. The Brake Release button (1) moves the box (around digit)
from left to right to select which digit to change.
2. Platform UP button (2) increases the numerical digit.
3. Platform DOWN button (3) decreases the numerical digit.
4. Change all five digits (4) to match password level, then press
the Brake Release button (1) again.
Programming Mode Selection
1. Use Platform UP/DOWN buttons (1) to move the selection box
(2) up or down to select item to program.
2. Press the Brake Release button (3) to enter selected mode then
move on to Selecting Programmable Item to Adjust.
SECTION 3 - MACHINE OPERATION
3-36 – JLG Lift – 3121186
Entering Password Programming Mode Selection
Entering Password
1. The Brake Release button (1) moves the box (around digit)
from left to right to select which digit to change.
2. Platform UP button (2) increases the numerical digit.
3. Platform DOWN button (3) decreases the numerical digit.
4. Change all five digits (4) to match password level, then press
the Brake Release button (1) again.
Programming Mode Selection
1. Use Platform UP/DOWN buttons (1) to move the selection box
(2) up or down to select item to program.
2. Press the Brake Release button (3) to enter selected mode then
move on to Selecting Programmable Item to Adjust.