JLG 80H ANSI Parts Manual - Manual (Page 343)

3120272 4-39
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
S
SECTION 4 PLATFORMS
FIGURE 4-9. CAPACITY INDICATOR INSTALLATION (OPTIONAL)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
Note: Use 1-207 for machines with standard controls
built prior to September 1991 and all machines with
hydraulic controls. Use 301-403 for machines with
standard controls built September 1991 to April 1995.
Use 501-652 for machines with standard controls built
April 1995 to present. Ref.
GAGE INSTALLATIONS (STANDARD PARTS)
(SEE NOTE FOR USAGE)
Ref.
1 4220044 Stop, Throttle 2
2
4160058
Spring, Torsion 1
3 3900111 Screw, Shoulder 3/8"-16NC x 1 3/4" 1
0100011 Loctite #242 A/R
GAGE INSTALLATIONS (VARIABLE PARTS)
(SEE NOTE FOR USAGE)
Ref.
51 Cable Options: 1
1060168
Cable (80HX with Racine Prop Valves)
1060168 Cable (80HX/80HX+6 with Vickers Prop Valves,
with Prop Tele and with Standard Platform)
1060369 Cable (80HX/80HX+6 with Vickers Prop Valves,
without Prop Tele and with Standard Platforms)
1060417
Cable (80HX with Vickers Prop Valves and Low
Mount Platforms)
1060369 Cable (80HX+6 without Prop Tele and with Low
Mount Platform)
1060168
Cable (80HX+6 with Prop Tele and with Low Mount
Platform)
52
Capacity Indicator Gage Options (See Items 101-151
for Breakdown):
1
2420055 Gage (Domestic/Standard)
2420050
Gage (CSA/2:1 Stability)
CAPACITY INDICATOR GAGE ASSEMBLY (SEE
NOTE FOR USAGE) (STANDARD PARTS)
Ref.
101 2420057 Housing 1
102 0440042 Bearing, Ball 2
103 4561774 Tube, Spacer 1
CAPACITY INDICATOR GAGE ASSEMBLY (SEE
NOTE FOR USAGE) (VARIABLE PARTS)
Ref.
2420055 ANSI Spec Ref.
2420050
CSA Spec/2:1 Stability Ref.
151 Nameplate - Capacity 1
1700503 ANSI Spec
1700502
CSA Spec/2:1 Stability