JLG 80H ANSI Parts Manual - Manual (Page 251)

3120272 2-161
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
FIGURE 2-41. TANKS INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
TANKS INSTALLATION Ref.
NOTE: For U/L Machines see Section 10.
FUEL AND HYDRAULIC TANK INSTALLATION Ref.
0236811
Standard Machines Ref. D
0254193 Machines With Heaters Ref. B
0251339 LP Only Machines (Hood Bracket & Hydraulic Tank
Installation) Ref. B
1 to 2 Not Used
3 0641614 Bolt 3/8"-16NC x 1 3/4" 6
4
4751600
Flatwasher 3/8" 8
5
4761600
Lockwasher 3/8" 8
6 3311601 Nut 3/8"-16NC 8
7 4300034 Stud (Welded on Part) 2
8 Breather Options: 1
1340021
Breather - Standard (Prior to July 1986)
2120039 Breather - Hostile Environment (Prior to July 1986)
1340046 Breather - All (July 1986 to Present)
9 to 50
Not Used
51 Fuel Tank Assembly Options: 1
0236285 Standard Machines Built Prior to June 1995 (See
Items 101-151 for Breakdown)
0255823
Standard Machines Built June 1995 to Present
(See Items 101-151 for Breakdown)
0901188 LP Only (Not Shown - Located in place of Fuel
Tank)
52
Hydraulic Tank Assembly (See Items 201-257 for
Breakdown):
1
4400216
Standard Machines
Use 4400267 Machines with Heaters Built Prior to July 1993
(Was p/n 4400216)
4400267
Machines with Heaters Built July 1993 to Present
4400216
LP Only
FUEL TANK ASSEMBLY Ref.
0236285
Prior To June 1995 Ref. 5/E
0255823
June 1995 To Present Ref. 2/B
4400389 Oversize (52 Gallon) Tank Ref. —
101
Not Used
102
Not Used
103 4060574 Protector, Gauge 1
104 4562516 Tube, Sight 15 in./38cm
105
Not Used
106 1320022 Clamp, Hose 2
107 3311401 Nut 1/4"-20NC 3
108
4761400
Lockwasher 1/4" 3
109
Not Used
110 2200052 Plug, Pipe 1