3 specifications, 1 travel speeds, 2 hydraulic cylinder performance – JLG G6-42A Service Manual User Manual
Page 23: Specifications, Travel speeds, Hydraulic cylinder performance
2-11
G6-42A, G9-43A, G10-43A
General Information and Specifications
2.3
SPECIFICATIONS
2.3.1
Travel Speeds
2.3.2
Hydraulic Cylinder Performance
Note: Machine with no attachment or load, engine at full throttle, hydraulic oil above 130° F (54° C) minimum, engine
at operating temperature.
G6-42A
G9-43A & G10-43A
First Gear
3.7 mph (5,6 km/h)
3.2 mph (5,1 km/h)
Second Gear
8.0 mph (12,9 km/h)
7.0 mph (11,2 km/h)
Third Gear
16.1 mph (25,9 km/h)
14.0 mph (22,5 km/h)
Fourth Gear
20.5 mph (32,9 km/h)
19.5 mph (31,4 km/h)
Function
Approximate Times (seconds)
G6-42A
G9-43A & G10-43A
Boom Extend (Boom Level)
13.8
13.4
Boom Retract
13.4
10.2
Boom Lift
12.6
10.7
Boom Lower
9.4
8.6
Attachment Tilt Forward
3.8
3.5
Attachment Tilt Rearward
3.4
3.1
Frame Level - Full Right to Left
7.7
9.3
Frame Level - Full Left to Right
3.5
10.7
Outriggers Down (Boom Level- No Load)
N/A
5.8 (G10-43A Only)
Outriggers Up (Boom Level- No Load)
N/A
4.4 (G10-43A Only)