JLG X700AJ Operator Manual User Manual
Page 8
![background image](/manuals/551897/8/background.png)
TABLE OF CONTENTS
ii
– JLG Lift –
3128790
SECTION - PARAGRAPH, SUBJECT
PAGE
SECTION - PARAGRAPH, SUBJECT
PAGE
4.5 TRACKS - DRIVING, STEERING AND
TRACK WIDTH ADJUST . . . . . . . . . . . . . . . . . . . . .4-5
Track width adjust. . . . . . . . . . . . . . . . . . . . . . . . .4-5
Travelling (Drive and Steer) . . . . . . . . . . . . . . . . .4-6
Travelling (Grades and Side Slopes) . . . . . . . . . .4-6
Jib Position for Travelling . . . . . . . . . . . . . . . . . . .4-8
4.6 OUTRIGGER OPERATION. . . . . . . . . . . . . . . . . . .4-10
Variable Outrigger Positioning . . . . . . . . . . . . . .4-10
Operating with Outriggers Set to 24° -
Restricted Work Area Of Operation . . . . . . . . . .4-12
Setting Outriggers From the Platform/Remote
Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-16
Retracting The Outriggers . . . . . . . . . . . . . . . . .4-17
4.7 BOOM/PLATFORM OPERATION. . . . . . . . . . . . . .4-18
Overload Alarm . . . . . . . . . . . . . . . . . . . . . . . . . .4-18
Platform Level Adjustment . . . . . . . . . . . . . . . . .4-18
Raise And Lower The Tower Boom . . . . . . . . . .4-20
Raise And Lower The Main Boom . . . . . . . . . . .4-20
Telescope The Main Boom. . . . . . . . . . . . . . . . .4-20
Platform Rotation . . . . . . . . . . . . . . . . . . . . . . . .4-20
Raise And Lower The Jib . . . . . . . . . . . . . . . . . .4-20
Emergency Lowering . . . . . . . . . . . . . . . . . . . . .4-22
Platform Removal/Installation . . . . . . . . . . . . . . .4-22
4.8 BATTERY CHARGING . . . . . . . . . . . . . . . . . . . . . .4-23
Battery Charging - Daily . . . . . . . . . . . . . . . . . . .4-23
4.9 SHUT DOWN AND PARK. . . . . . . . . . . . . . . . . . . .4-24
4.10 LIFTING AND TIE DOWN. . . . . . . . . . . . . . . . . . . .4-25
Lifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-25
Tie Down. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-26
4.11 MACHINE DECALS . . . . . . . . . . . . . . . . . . . . . . . . 4-28
SECTION - 5 - EMERGENCY PROCEDURES
Power Main Cut-Off Switch Location . . . . . . . . . . 5-1
Operator Unable to Control Machine. . . . . . . . . . 5-2
Platform or Boom Caught Overhead . . . . . . . . . . 5-2
Manual Descent with Engine Running and
Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Manual Descent with Engine Running
but without Electrical Power. . . . . . . . . . . . . . . . . 5-6
Manual Descent without Engine and
Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Outrigger/Track Movement
Emergency Procedure . . . . . . . . . . . . . . . . . . . . 5-10
5.4 SAFETY DEVICES BYPASS KEY USE . . . . . . . . . 5-13
Using The Emergency Descent In The Case Of An
Outrigger Losing Contact With The Ground . . . 5-14
Machine Realignment Emergency Procedure. . 5-15
SECTION - 6 - GENERAL SPECIFICATIONS AND OPERA-
TOR MAINTENANCE
6.1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1