Eppendorf epMotion 5070 - Manual (Page 77)

Maintenance
epMotion ® 5070
English (EN)
77
Abb. 10-2: Exchanging the sealing rings
Fig. 10-2: Exchanging the sealing rings
Exchange the sealing rings as follows:
Prerequisites
• New sealing ring
• Auxiliary tool
• Mounting aid
• Damp, lint-free cloth
1. Place the edge of the auxiliary tool at the height of the sealing ring.
2. Use the auxiliary tool to cut the sealing rings on the dispensing tool.
3. Remove the sealing rings with the fingers.
4. Clean all tip cones with a damp, lint-free cloth.
5. Attach the new sealing ring with the mounting aid.
6. Position the sealing rings in the grooves of the tip cones.
10.8 Customer service functions
Customer service functions are available to service and check your device.
The following functions can be carried out:
The software operating manual contains a detailed description of the functions.
1 Sealing ring 2 Tip cone
Customer service function Description
Optical Sensor Define the functions of the optical sensor
Tool interlock Check the interlocking mechanism of the tools.
Dosing device Read out the number of stroke movements of a dispensing tool.
1
2