Eppendorf epMotion 5070 - Manual (Page 62)

Operation
epMotion
® 5070
English (EN)
62
9.1.2.3 Data exchange
You need a USB storage medium in order to exchange and backup data.
1. Connect the USB storage medium to one of the USB ports.
The storage medium is ready for operation after 5 seconds.
2. Execute the required function in the software (refer to epMotion software operating manual).
9.1.3 Using the epMotion
The epMotion workflow consists of the following steps.
1. Create an application (refer to epMotion software operating manual).
2. Equip the worktable (see p. 63).
3. Execute the application (see p. 66).
4. Complete your work (see p. 69).
Step 1 is described in the software operating manual. Steps 2 to 4 are described in the following sections.
NOTICE! Data loss and malfunction due to malicious software.
Malicious software (e.g., a computer virus) on the USB storage medium can be transferred to
the EasyCon.
 Before connecting the USB storage medium to the EasyCon, check the USB storage
medium using a current antivirus software.
NOTICE! Data loss due to missing data backup or incorrect storage of storage media.
User accounts, applications, labware and protocols are saved in a database. If this database
becomes damaged (e.g., due to a hardware defect), this information will be lost.
Eppendorf is not liable for data loss or any associated damages.
 Regularly backup your database using the backup function in the software.
 Save the secured data on an external storage medium.
 Store the external storage media according to the manufacturer’s specifications.
NOTICE! Malfunction due to third-party software.
Third-party software can impair the functioning of the
epBlue software.
 Only install software approved by Eppendorf.