Liquid dispensing at the height of the vessel edge – Eppendorf epMotion 5070 User Manual

Page 36

Text mode
Original mode

Dispensing liquids
epMotion

5070

English (EN)

6.3.3

Liquid dispensing at the height of the vessel edge

In the software, the pipette tip can be positioned at a height of 3 mm – 4 mm below the edge of the vessel
using the

Dispense from top

option. The height of the pipette tip does not change.

Use the option for:

• Quick dispensing
• Dispensing in vessels with small diameters, e.g., 384-well plates, capillaries

The tips remains in the upper area of the vessel and do not travel further into the vessel. This virtually
eliminates the possibility of the pipette tip becoming contaminated.

• Dispensing in plates with vastly different levels in the wells