Advance Adapters 15-1000 User Manual
Frame rail supported drivetrain jack, Patent pending
ADVANCE ADAPTERS INC.
P/N: 15-1000
P.O. Box 247, 4320 Aerotech Center Way
New Item: (7-09)
Paso Robles, CA 93447
PAGE 1 OF 4
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
11-10-09
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
KIT CONSISTS OF:
No.
Qty.
Part No.
Description
FRAME RAIL SUPPORTED
DRIVETRAIN JACK
1.
2
15-2005
"J" HANGER FRAME BOLT
2.
1
15-2007
MANUAL TRANSMISSION SADDLE (JEEP TRANSMISSIONS)
3.
1
15-2008
UNIVERSAL TRANSMISSION SUPPORT
4.
2
15-2012
TELESCOPING FRAME SUPPORTS
5.
1
15-2013
CENTER FRAME SUPPORT
6.
2
15-2022
UNIVERSAL FRAME HANGER BOLTS
7.
2
15-3002
1/2" WASHER
8.
2
15-3012
1/2" WING NUT
9.
3
15-3023
1/4" LOCKING PINS
10.
1
15-2001
CARRIER (JACK HOUSING)
THE FOLLOWING COMPONETS ARE INSTALLED INTO THE CARRIER (JACK ASSEMBLY):
11.
2
15-2009
SHORT ARM LIFTING SUPPORT (INSTALLED)
12.
1
15-2010
LONG ARM LIFTING SUPPORT (INSTALLED)
13.
1
15-2011
1/4" RIVET SHAFT (INSTALLED)
14.
1
15-2015
SLIDER PIN ALLTHREAD SUPPORT (INSTALLED)
15.
1
15-2016
SLIDER PIN ALLTHREAD SUPPORT W/ FLAT (INSTALLED)
16.
1
15-2017
THREADED CENTER PIN (INSTALLED)
17.
2
15-2020
LOAD WASHERS (INSTALLED)
18.
3
15-3002
1/2" WASHER (INSTALLED)
19.
1
15-3003
1/2" NYLON WASHER (INSTALLED)
20.
2
15-3006
5/8" COUPLING NUT (INSTALLED)
21.
1
15-3014
1/2-13 ADJUSTING SCREW (INSTALLED)
22.
4
15-3019
3/4" E-CLIP (INSTALLED)
23.
1
725004
1/2"-13 NUT (INSTALLED)
Patent Pending