Advance Adapters KJ09156BK1 User Manual
Page 6

10.
Install the front wheels and lower the vehicle to the floor.
11.
Place the wheel chocks at the front wheels and jack up the rear sus-
pension. Support the vehicle at the frame and remove the rear tires.
12.
With the jack under the rear axle, raise the axle so you can remove
the rear shocks. Disconnect rear sway bar at the frame. Also unbolt
the bracket that holds the brake line to the frame.
13.
Remove the rear track bar at the axle end.
14.
Place the new rear track bar bracket on the rear axle. Using the track
bar bolt, Bolt down the bracket and make with a punch or marker
where you will need to drill the 2 new mounting bolts.
See also other documents in the category Advance Adapters For the car:
- 712500A4 (1 page)
- 712500A (1 page)
- 712500M (1 page)
- 712500T (1 page)
- 712502 (3 pages)
- 712505 (2 pages)
- 712506 (2 pages)
- 712508 (2 pages)
- 712510 (2 pages)
- 712511 (2 pages)
- 712512 (2 pages)
- 712512-T98 (2 pages)
- 712514 (2 pages)
- 712514-T98 (2 pages)
- 712516 (2 pages)
- 712517 (2 pages)
- 712518 (2 pages)
- 712519 (2 pages)
- 712521 (2 pages)
- 712522 (2 pages)
- 712523 (2 pages)
- 712527 (2 pages)
- 712528 (2 pages)
- 712529 (2 pages)
- 712530 (3 pages)
- 712532 (2 pages)
- 712533 (2 pages)
- 712534 (2 pages)
- 712541 (4 pages)
- 712543 (3 pages)
- 712544 (2 pages)
- 712543J (4 pages)
- 712548 (4 pages)
- 712549 (3 pages)
- 712550 (2 pages)
- 712551 (2 pages)
- 712552 (2 pages)
- 712553 (2 pages)
- 712555 (3 pages)
- 712559 (3 pages)
- 712560 (3 pages)
- 712560V (3 pages)
- 712561 (3 pages)
- 712561V (3 pages)
- 712562 (1 page)