Advance Adapters KJ09156BK1 User Manual
Page 4
3.
Disconnect the ABS line form the bracket on the steering knuckle on
the driver side then the passenger side. Remove the factory shocks.
4.
With the shocks removed , sway bar end links, and ABS line discon-
nected, lower the axle down to remove the coil springs on the driver
side first then the passenger side.
16. After drilling the 2 holes place the track bar bracket on the axle.
17. Install the supplied sleeve and stock track bar bolt in the lower
mounting hole.
Sleeve
18. Install the supplied 3/8” x 1” bolts in the holes just drilled. Tighten
the stock track bar bolt and the 3/8” bolts.
19. Position the track bar in the upper portion of the track bar bracket and
secure is using the supplied 9/16” x 3” bolt, washer and nut. Tighten.
- 712500A4 (1 page)
- 712500A (1 page)
- 712500M (1 page)
- 712500T (1 page)
- 712502 (3 pages)
- 712505 (2 pages)
- 712506 (2 pages)
- 712508 (2 pages)
- 712510 (2 pages)
- 712511 (2 pages)
- 712512 (2 pages)
- 712512-T98 (2 pages)
- 712514 (2 pages)
- 712514-T98 (2 pages)
- 712516 (2 pages)
- 712517 (2 pages)
- 712518 (2 pages)
- 712519 (2 pages)
- 712521 (2 pages)
- 712522 (2 pages)
- 712523 (2 pages)
- 712527 (2 pages)
- 712528 (2 pages)
- 712529 (2 pages)
- 712530 (3 pages)
- 712532 (2 pages)
- 712533 (2 pages)
- 712534 (2 pages)
- 712541 (4 pages)
- 712543 (3 pages)
- 712544 (2 pages)
- 712543J (4 pages)
- 712548 (4 pages)
- 712549 (3 pages)
- 712550 (2 pages)
- 712551 (2 pages)
- 712552 (2 pages)
- 712553 (2 pages)
- 712555 (3 pages)
- 712559 (3 pages)
- 712560 (3 pages)
- 712560V (3 pages)
- 712561 (3 pages)
- 712561V (3 pages)
- 712562 (1 page)