Advance Adapters SATURN - Manual (Page 10)

SATURN SHIFTER LINKAGE ASSEMBLY
There are 4 linkages available for the Saturn overdrive. Illustrated below is the linkage for a T90 dual lever transfer case. The
pivot bracket on most linkages bolts to the 2 front top cover bolts of the transmission. The universal Saturn shifter bolts to the top
2 holes of the Dana 18 transfer case.
Little or no modifications will be necessary for linkages offered for the stock transmission assemblies. On the universal shifter
application, some fabrication may be required. This is due to the various transmission assembles that could be installed in the
vehicle.
Both above photos illustrate the shift rod installation on the Saturn Overdrive. The shift rod must remain in close proximity to the
overdrive unit for proper floorboard clearance. The configuration of some of the shifter rods are to avoid transfer case shifter lever
interference.
SATURN SHIFTERS SHIFTER COMPONENTS
P/N 920000
T90 Dual Lever T/C Shifter
P/N 920021
Dual Lever Rubber Boot
P/N 920001
T90, T86 Single Lever T/C Shifter
P/N 920022
Dual Lever Retainer Ring
P/N 920003
Universal Shifter
P/N 920023
Universal Rubber Boot
P/N 920013
T14 Shifter
P/N 920024
Universal Retainer Ring